Working pressure: 0-10bar
Working temperature: -40~150℃
Drive mechanism: manual control
Seal material: EPDM+TFM, EPDM
Body design: three valve body design (with straight elbow) design
Body material: 316L (casting, CF3M EN1.4409)
Interface size: main channel (DN1) DN25-DN65, DN15-DN50 (DN2)
Interface mode: KST330-6: Welding
Surface treatment: the outer surface of Ra is less than or equal to 0.5
m (SF1),
The inner surface of Ra is less than or equal to 0.375 m (SF4)
Interface standard: ISO, DIN, BPE.3A BS, ASME

To avoiding a U-shaped three-way pipe welding straight throughdiaphragm valve weir partition retention, reduce the number ofwelding, improve finish of contact surface (MOC), with a minimum length of horizontal pipeline.Based on the same BPE 2005:SD-3.11.1 aseptic design specification for L / D ratio is less than or equal to 2:1, eliminate due to a material inlet fluid retention area, causing bacteria risks to ensure the absolute safety of loop.